-
Gap at Bathroom Threshold
Hi Joe,
I finished laying rigid vinyl core plank in my master bedroom. It is CoreLuxe Ultra from LL. As you can see from the photo, I was able to maintain the 1/4” gap along the entire wall except for this portion running adjacent to the bathroom door threshold, which is marble. Do I need to go back and cut a gap along the threshold and cover it with quarter round, or should it be ok since the gap was maintained throughout the rest of the room?
Thanks,
Jay
-
6 Replies
-
I do not see a pic?
-
-
-
Is is it gapped on the opposite wall?
-
If it is you should be ok. I usually like to leave an 1/8th inch. You can always let it go and cut it later if there is a problem or just do it now. You can add quarter round or use silicone.
-
Thanks, Joe. It is gapped 1/4” all along the opposite wall. I may just use the oscillating saw to open it up a bit and add some quarter round. I was trying to avoid leaving a visible gap right at the inside corner of the door casing, which is how I ended up with little to no gap at the marble threshold.
Thanks,
Jay
-
Log in to reply.