Reply To: Blueprint Request

[Rick]

Hi Joe,

Thank you so much! I really appreciate the blueprint. I forgot to mention that we are planning to use the quarter round everywhere.

I do have a cheater board question. Since I plan on doing the 3/8” gap everywhere and filling it with backer rod and silicone for the waterproofing would I leave the female end on as it is 1/16th shy of 3/8”? I thought with the sharpie line it would be close to 3/8”. One of the reasons for leaving the baseboard on was that it was installed down to the slab and it seemed good to have as a stop for the backer rod.

I am in Las Vegas so I understand the heat! I lived in Bloominton MN for 4 years so I know what 90-100 with the humidity is like so I feel for you brother!

[Rick]

Hi Joe,

Thank you so much! I really appreciate the blueprint. I forgot to mention that we are planning to use the quarter round everywhere.

I do have a cheater board question. Since I plan on doing the 3/8” gap everywhere and filling it with backer rod and silicone for the waterproofing would I leave the female end on as it is 1/16th shy of 3/8”? I thought with the sharpie line it would be close to 3/8”. One of the reasons for leaving the baseboard on was that it was installed down to the slab and it seemed good to have as a stop for the backer rod.

I am in Las Vegas so I understand the heat! I lived in Bloominton MN for 4 years so I know what 90-100 with the humidity is like so I feel for you brother!