Find answers, ask questions, and connect with our community here!

Activity Feed Forums General The last piece of each row that needs to go into the undercut space

  • The last piece of each row that needs to go into the undercut space

    Posted by Ping-Hui on July 11, 2021 at 6:34 am

    Joe,

    Following your advice, I have started the project starting from the Master Bedroom (Pt A on the attached diagram.) I have finished the installation of the Master bedroom, the other bedroom, and the hallway in between. It went really well. Now I have a question.

    In the attached floor plan diagram, the orange dash arrow line shows the installation direction for rows of the LVT boards. The blue arrow shows the LVT board running direction. The short green dash line (Pt B) shows the current finished area.

    As you recommended, I have undercut the base of the stair rail (see attached picture). Given the running direction of the LVT boards, around the area of the stair rail, the last piece of each row would go into the “undercut space” of the stair rail base. Not sure how to install the last piece of each row. Please advice.

    If it is more convenient for you, I can call you. THANKS.

    Ping-Hui replied 2 years, 8 months ago 1 Member · 0 Replies
  • 0 Replies

Sorry, there were no replies found.

Log in to reply.