MemberSeptember 20, 2021 at 3:37 pm
I took the time today to make a better layout of my house to help show where the cracks are. The planks will run north/south with north being at the top of the drawing. The blue line shows a crack that drops about 1/2″ on the left of the line. I did starting filling it in with Henry 549. That crack also goes into the kitchen but I was able to level that without much issue since its a smaller area. The red line is the crack is the one I showed with the straight edge and also dips to left of the line. As far as how much it dips down varies though out. I am realizing self lever might be my best option Any tips and suggestions for someone that has never used self lever are welcome.
Thank you again for all the help with this super long project. Cant wait to have normal floors again.